How To Apply an Iron & Sew On Embroidered Patch

We tell you all you need to know to apply your Iron-on/ Sew-On patches.

Step 1

Iron your fabric

Ensure your fabric is nice and flat with no creases.

Step 2

Peel off the patch backing

Peel off the paper from the back of the patch if there is any but make sure to leave the film behind. This is the sticky stuff when heated up!

Step 3

Place patch onto warm fabric

With the film facing the right side of the fabric, place the patch onto the intended fabric.

Step 4

Apply heat

Place a piece of Teflon, greaseproof paper or felt on top of your patch and then the iron or heat press. Make sure to apply heat for at least 10 seconds evenly over the area you intend the patch to adhere to.

Step 5

Apply heat to back of fabric

Flip your fabric over and iron and apply even pressure and heat to the back of the patch area for at least 10 seconds.

If your fabric isn't heat proof, use a sheet of Teflon, greaseproof or felt here.

Step 6

Let the fabric cool

Resist the urge to pick at the patch to see if it is attached securely. Wait 3-5 minutes until the patch is fully cool.

Securing your patch with thread

Once your patch is fully cooled. If you still think it needs some more stability around the edges, you can use the thread provided to stitch to secure the edges. The video below shows how.

Please note: If you are applying the patch to a jacket, the fabric will likely be sturdy that it doesn't have to be hooped for stitching. Also for faux leather, do not hoop as it risks damaging the fabric.